Steam Traps

Features

• Quick startup

  Automatically discharges initial air and cold condensate. The diaphragm air vent follows the saturation temperature and prevents air and steam locking.

• Suitable for medium to high capacity steam processes

  Adjust the degree of valve opening according to volume of condensate generated to provide maximized heat exchange capacity.

• Condensate recovery

  With its high degree of back pressure tolerance, this model supports condensate recovery.

• Easy maintenance

  For quick and easy maintenance, this model can be repaired directly in line.

• High discharge capacity

  A double ported balance valve provides a large discharge capacity in comparison with single valve models.

Dimensions/Weight

Flanged

 

Size	Dimensions (mm)					Dimensions (in)					Weight
	L	H1	H2	W1	W2	L	H1	H2	W1	W2	(kg)	(lb)
2”	320	155	250	90	410	12.6	6.1	9.8	3.5	16.1	75,0	165.4
2 1/2”

*Available flange standards: ASME/JPI 150lb, 300lb, DIN PN40, JIS 10K, 16K, 20K
*Customized face-to-face dimensions on request.
*Please contact MIYAWAKI for further information.

*Available flange standards: ASME/JPI 150lb, 300lb, DIN PN40, JIS 10K, 16K, 20K

●Maximum allowable pressure (PMA): 4,0MPa (580psig)
●Maximum allowable temperature (TMA): 400℃ (752℉)
●Maximum operating back pressure (PMOB): 90% of inlet-side pressure

*ASTM material (WCB) on request.

●This product uses a double ported balance valve system so if the actual condensate volume is significantly lower than the product’s discharge capacity, there may be a steam leak.