Steam Trap Survey
Steam Trap Management System Steam Trap Survey
Dr. Trap Jr. PM15
Features
*The PM15 is sold as a set with PM11 Ver.1 (hardware) and PM150 (software).
Main Features (Hardware)
Main features of the newly improved PM11 Ver.1
●Anti-static buildup functionality has been added to the body, which retains its simple waterproofing processing. Thanks to this, not only is the product not prone to the impact of static electricity from external sources, the body itself is not prone to generating static electricity.
● The battery life is also now much longer. (Approximately double the previous battery life)
● This product complies with European standards.
CE mark (EMC directive 2004/108/EC)Clear display, simple operation
Displays ultrasound frequency band vibrations and temperature on one screen.
All operations are 1-key. No operations are required during normal use.
*The vibration values displayed by the PM11 are easy to read thanks to simple unit-less relative vibration values obtained by digitizing the magnitude of the ultrasound vibrations (degree of acceleration) detected by the vibration sensor and assigning an integer in the range 0 - 400.
Can be used continuously for up to 80 hours with the power supply switched on.
The power supply is automatically switched off after 9 minutes of inactivity.
Ancillary Functions
Stopwatch
This is effective for detecting periodic changes in steam trap vibration.
Expected steam pressure display
Estimates the saturated steam pressure from the detected temperature, and displays it.
Main features (software): SurveyPro Light
Output of steam leak rate and cost incurred
By simply entering the vibration value detected by the PM11, you can get an instant determination of the steam leakage, steam leak rate, and cost incurred.
High speed analysis and aggregation processing
As soon as you have finished entering the results of inspection, you can get an instant at-a-glance overview of the defect rate, defective trap breakdown, and total cost incurred.
Specifications
Hardware
| Model | PM11 Ver.1 | |
|---|---|---|
| Power source (hours of continuous use) | 1.5V AA alkaline battery x2 (80hrs +) (45hrs+ with LCD on continuously) 1.2V AA rechargeable battery (1900mAh) x2 (75hrs +) (40hrs+ with LCD on continuously) |
|
| Allowable environmental temperature | 0 - 40℃ (32 - 104℉) | |
| Vibration sensor (frequency band) | Piezo-ceramic acceleration sensors (10k - 40kHz) | |
| Temperature sensor (measurement temperature range) | Thermistor (0 - 250℃ (32 - 482℉)) | |
| Display | LCD display with light | |
| Operation | 1-key operation | |
| Functions | Vibration display | Max. 400 |
| Temperature display | Max. 250℃ (482℉) | |
| Vibration peak value display | When temperature probe not used | |
| Stopwatch | Max. display 99hrs 59s | |
| Expected steam pressure display | When temperature probe is used | |
| Power supply auto-off | After 9 minutes of no use | |
SurveyPro Light (software)
| Model | PM150 |
|---|---|
| Version | V 2.0 |
| Media | CD-ROM |
| CPU | Processor 1GHz or higher |
| Memory | RAM 1GB or more 20GB of free disk space for the 64-bit version (excluding data area) |
| Supported operating systems | Windows 10 32-bit or 64-bit |
| Hard disk space | 16GB of free disk space 20GB of free disk space for the 64-bit version (excluding data area) |
| Display | Resolution: 1024 x 768 pixels or higher |
| Required software | Microsoft .NET Framework 4 Client Profile Microsoft SQL Server Compact 3.5 SP2 |
| Other requirements | Please contact MIYAWAKI about Windows11. CD-ROM Drive is required. *Dr. Trap and SurveyPro are registered trademarks of Miyawaki Inc. Windows and Microsoft are registered trademarks of Microsoft Corporation in the USA and other countries. |
Download
* Membership registration is required to download the documents.
*The PM15 is sold as a set with PM11 Ver.1 (hardware) and PM150 (software).
Main Features (Hardware)
Main features of the newly improved PM11 Ver.1
●Anti-static buildup functionality has been added to the body, which retains its simple waterproofing processing. Thanks to this, not only is the product not prone to the impact of static electricity from external sources, the body itself is not prone to generating static electricity.
● The battery life is also now much longer. (Approximately double the previous battery life)
● This product complies with European standards.
CE mark (EMC directive 2004/108/EC)Clear display, simple operation
Displays ultrasound frequency band vibrations and temperature on one screen.
All operations are 1-key. No operations are required during normal use.
*The vibration values displayed by the PM11 are easy to read thanks to simple unit-less relative vibration values obtained by digitizing the magnitude of the ultrasound vibrations (degree of acceleration) detected by the vibration sensor and assigning an integer in the range 0 - 400.
Can be used continuously for up to 80 hours with the power supply switched on.
The power supply is automatically switched off after 9 minutes of inactivity.
Ancillary Functions
Stopwatch
This is effective for detecting periodic changes in steam trap vibration.
Expected steam pressure display
Estimates the saturated steam pressure from the detected temperature, and displays it.
Main features (software): SurveyPro Light
Output of steam leak rate and cost incurred
By simply entering the vibration value detected by the PM11, you can get an instant determination of the steam leakage, steam leak rate, and cost incurred.
High speed analysis and aggregation processing
As soon as you have finished entering the results of inspection, you can get an instant at-a-glance overview of the defect rate, defective trap breakdown, and total cost incurred.
Hardware
| Model | PM11 Ver.1 | |
|---|---|---|
| Power source (hours of continuous use) | 1.5V AA alkaline battery x2 (80hrs +) (45hrs+ with LCD on continuously) 1.2V AA rechargeable battery (1900mAh) x2 (75hrs +) (40hrs+ with LCD on continuously) |
|
| Allowable environmental temperature | 0 - 40℃ (32 - 104℉) | |
| Vibration sensor (frequency band) | Piezo-ceramic acceleration sensors (10k - 40kHz) | |
| Temperature sensor (measurement temperature range) | Thermistor (0 - 250℃ (32 - 482℉)) | |
| Display | LCD display with light | |
| Operation | 1-key operation | |
| Functions | Vibration display | Max. 400 |
| Temperature display | Max. 250℃ (482℉) | |
| Vibration peak value display | When temperature probe not used | |
| Stopwatch | Max. display 99hrs 59s | |
| Expected steam pressure display | When temperature probe is used | |
| Power supply auto-off | After 9 minutes of no use | |
SurveyPro Light (software)
| Model | PM150 |
|---|---|
| Version | V 2.0 |
| Media | CD-ROM |
| CPU | Processor 1GHz or higher |
| Memory | RAM 1GB or more 20GB of free disk space for the 64-bit version (excluding data area) |
| Supported operating systems | Windows 10 32-bit or 64-bit |
| Hard disk space | 16GB of free disk space 20GB of free disk space for the 64-bit version (excluding data area) |
| Display | Resolution: 1024 x 768 pixels or higher |
| Required software | Microsoft .NET Framework 4 Client Profile Microsoft SQL Server Compact 3.5 SP2 |
| Other requirements | Please contact MIYAWAKI about Windows11. CD-ROM Drive is required. *Dr. Trap and SurveyPro are registered trademarks of Miyawaki Inc. Windows and Microsoft are registered trademarks of Microsoft Corporation in the USA and other countries. |
* Membership registration is required to download the documents.